510 427-4599
VACUMAID
CENTRAL VACUUM SYSTEM
This wall-mounted vacuum cleaner is extremely powerful and has a variety of cleaning applications, both residential & commercial. It can be placed in garages, auto detail shops, workshops, craft rooms, utility rooms, basements, clean rooms and can be used as a personnel vac.
This system is a wall mounted vacuum cleaner that allows you to clean around the area where it is mounted. This unit is ideal for the garage, workshops, basements, and many commercial applications.
Vacuuming
Inserting the hose
The hose connects to the system through the utility valve inlet on the front of the unit by lifting the door open and inserting the hose. See below for using your attachments & cleaning tools.
On/Off
Switch Insert the hose before turning the unit on. The system is turned on and off by flipping the switch on the side of the unit.
Exhaust/Blow
Stem located on the side of the unit. For this feature to operate, you must also open the utility valve on the front of the unit and insert the additional cuff that is included with your system. This must remain inserted to hold the door open for the blow feature to work. When finished, turn off the unit first, then remove both the hose and cuff from the two inlets.
Variety of Tools for a Variety of Uses
This system comes with a variety of tools and accessories for your garage cleaning needs. The standard hose is 30 ft. long (a 50’ version is also available), so you won’t have to pull and stretch to make it reach. There is a floor brush for the garage or shop floor and premium cleaning tools for dusting and cleaning upholstery, vehicle floors and in the cracks and crevices of your vehicle or shop bench. After you clean up the car and work places, you can tackle the leaves on the floor of the garage. Also included are storage accessories such as a hose hanger and caddy bag for tool storage. An extension wand is also included for added reach and above-floor cleaning.
USING YOUR ATTACHMENTS & CLEANING TOOLS
Telescopic Wand
Provides you extra length for floor cleaning or reaching high areas.To use: Adjust by twisting the ratcheting mechanism in the middle of the wand to release and extend. Twist back to tighten.
Floor Brush
For cleaning light dirt & dust on hard floor surfaces. To use: Attach to telescopic wand and go back and forth over the area to be cleaned. Do not force the front of the brush down when moving forward. Allow the brush to gently glide across the floor to pick up larger debris. (FT220 floor tool is recommended for larger debris.)
CLEANING TOOLS
All cleaning tools will attach to either the hose end or the telescopic wand by pushing firmly onto the end.
a) Upholstery Tool Works well for cleaning car upholstery & carpet.
b)Crevice Tool Reach into cracks and crevices that are hard to reach.
c)Dusting Brush Use for dusting shelves, tables, dashboards, etc.
Hose Hanger
Loop hose on hanger approx. 4-5 times or loop hose on floor and then pick up and hang on hanger.